CDR King CW 5356U/5358U Dual Wan Router Users

[isugisug]

Wala na kac dhcp ung router ko na cw 5358u pra working like switch cya. Sa tingin mo boss kaya pa ma recover using serial? Pra sana d na masayang ung pera png bili.

 

[madeinchina]

nabasa ko lang dito na gumagamit kayo ng 64k based NVRAM firmware, in theory gagana sya at start pero once na ma reach mo ang 32K, good as brick na yung router nyo at according sa google, ang recovery lang dyan is through JTAG at wala pa ni isang tao ang nakagawa mag JTAG sa router na to, puro serial/UART recovery lang ginagawa nila.

 

[isugisug]

Meron nko serial pro hangang cmd lng ako at d na gumagana. Prang forever na cya.. My pagasa pa kaya ito ma unbrick?

Pa remote naman sa my alam. Salamat

 

[popo007]

@isugisug

Can you enter recovery mode?

 

[richard604]

sir good... day kakabili ng router na CW-5356U cdrking.. my dalawa po aq connected modem isang 22i at dv235t ask q lang pd ko ba cla pagsamahin at mgsama bilis nila... enxa na sir newbie po s ganito prob...

 

[mjcoo19]

guys ask ko lang pwd ba ma install yun roughter ko kahit wala na yung cd installer?

 

[jonrayz]

Sir, patulong naman. Nag palit ako firmware ng CDR King Dual WAN - CW-5356U ko to Tomato Shibby v1.28. After ko ireset factory defaults, di na sya ma-access. Blank default gateway na, kahit yung wifi nya nakalagay Tomato cdr-king, wala passowrd pero ayaw naman magconnect. Kahit pindutin ko reset button sa likod ng device wala effect. Na brick po b device ko? May power, lights etc naman.

Thanks in advance.

Rey

 

[Mammon0]

Mga bossing may nakakaalam ba dito kung paano iconfigure yung 5356u stock para sa multiwan routing?
Gusto ko sana paghiwalayin yung traffic nang port 80, 443 sa game port pero for some reason di wala yung stock firmware nito tapos yung latest na kamatis ni shibby eh sira yung 2nd WAN niya...
May nabasa ako dito na may nakagawa nito gamit commandline pero wala siya pinost kung paano... meron bang makakatulong sakin nito?

 

[benedick134]

san kayo naka bili ng 5358U ? laging walang stock sa cdrking

 

[mjcoo19]

ask lang pwede q po ba mapagana yung roughter q using globe broadband stick?

 

[dirkblooms19]

ask lang pwede q po ba mapagana yung roughter q using globe broadband stick?

Pwede yan... REad 1st Page... k:




-----------------------------------------------------------------------
Paano ba MagSetup ng VPN sa ROUter... cno nakaka alam?

 

[MangLando]

May update si shibby sa Dual wan Function ng Wifi Router natin

http://linksysinfo.org/index.php?threads/tomato-multiwan.71978/

Sir popo007 alind firmware sa link na ito ang pwede sa cw5358u?
http://tomato.groov.pl/download/K26ARM/testing/132-MultiWAN/

Pwede yan sir, kung pwede supported kay RT-n10U, pwede rin kay 5358u

 

[mjcoo19]

aztech un name ng roughter q my usb port sa likod kaso dko alam panu pa gaganahin patulong namn po mga master salamat


-----------------------------------------------------------------------
Paano ba MagSetup ng VPN sa ROUter... cno nakaka alam?[/QUOTE]

 

[popo007]

aztech un name ng roughter q my usb port sa likod kaso dko alam panu pa gaganahin patulong namn po mga master salamat


-----------------------------------------------------------------------
Paano ba MagSetup ng VPN sa ROUter... cno nakaka alam?

[/QUOTE]


We are not sure if it works... This is for CW5356/58u units.. Please refer to Aztech thread or any appropriate thread to properly address your issue.

Thanks,
popo007

 

[redpoison12]

@isugisug
May chance pa sa serial yan ung sakin kasi baka bumigay na kakareflash.. Bumili pako dati ng serial to ttl usb connector and nabuhay ko siya.. Nasa 1st page po ang guide ko dun

pwd nman po change flash chip sir if u want pra tataas ang memory

ST flash chip kc madali masira... but try nlang sa orig board humugut compare bumili sa china.. ahahaha

 

[jesthersilvestre]

after 5years. bumigay na 5358u ko, normal usage.. used as NAS.

 

[isugisug]

pa help po paano ma unbrick cw5354u ko...

after ko po magupgrade d na cya nag bibigay ng DHCP pro my lyt namn ang power at blinking naman ang mga lanports pag my nka saksak.. pro pag buksan ko default address nya na 192.168.1.1 ay walang connection and d nag oopen..

baka po my mga guide kayo paano maayos ito..

na try ko na ung galing sa C-r king na guide pro not working pag mat TFTP ako

ito ung lumalabas:




Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Windows\system32>cd c:\

c:\>tftp -i 192.168.1.1 put tomato-1.27_CW-5354U.trx

Transfers files to and from a remote computer running the TFTP service.

TFTP [-i] host [GET | PUT] source [destination]

-i Specifies binary image transfer mode (also called
octet). In binary image mode the file is moved
literally, byte by byte. Use this mode when
transferring binary files.
host Specifies the local or remote host.
GET Transfers the file destination on the remote host to
the file source on the local host.
PUT Transfers the file source on the local host to
the file destination on the remote host.
source Specifies the file to transfer.
destination Specifies where to transfer the file.

 

[bertserial]

pa help po paano ma unbrick cw5354u ko...

after ko po magupgrade d na cya nag bibigay ng DHCP pro my lyt namn ang power at blinking naman ang mga lanports pag my nka saksak.. pro pag buksan ko default address nya na 192.168.1.1 ay walang connection and d nag oopen..

baka po my mga guide kayo paano maayos ito..

na try ko na ung galing sa C-r king na guide pro not working pag mat TFTP ako

ito ung lumalabas:




Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Windows\system32>cd c:\

c:\>tftp -i 192.168.1.1 put tomato-1.27_CW-5354U.trx

Transfers files to and from a remote computer running the TFTP service.

TFTP [-i] host [GET | PUT] source [destination]

-i Specifies binary image transfer mode (also called
octet). In binary image mode the file is moved
literally, byte by byte. Use this mode when
transferring binary files.
host Specifies the local or remote host.
GET Transfers the file destination on the remote host to
the file source on the local host.
PUT Transfers the file source on the local host to
the file destination on the remote host.
source Specifies the file to transfer.
destination Specifies where to transfer the file.

gamit ka windows XP, huwag win7 and above

 

[jhayclouds]

mga master interested ako sa router na to... anu ba pedeng gawin dito?? para po ma idea ako.. pede ba to sa load balancing,openvpn etc?? palist nlng po ung mga ginagawa nyu sa router na to thanks po sa tutulong!!

 

[stanley3]

Pag nag upgrade ng firmware mabubura matic yung settings? Or pwede save ko muna config ng luma then after reflash load ko lang ulit?