ZTE MF180 Openline Procedure 100% WORKING!!

[hisukagon]

wow. ./ thanks dito mauunlock ko na din ung mf180 ko. .

 

[Looking4FBT]

meron po ba para sa huawei e173? smart po sya.

 

[angelkanz]

try ko ngayon salamt tol

 

[r3ddr460n27]

Mga ka symbianize ingat po sa pag a unlock ng MF-180 modem ma a-unlock nyo nga sya pero mataas ang posibility na hihina ang signal nyo. puno ang GPRS signal pero pag dating sa 3g signal 1 bar lang. marami ng nangyari na ganito kaya ingat sa pag a-unlock.

 

[jemskiemumu]

Sir parehas po ito dun sa procedure ng pag unlock ng mf180??? parang parehas po kasi pede po ba i edit nalang ng direct yung net config??? tanung lang po

 

[tammy03990]

ts baka may alm ka sa mf100..

 

[alaa2003]

50% stop

how can i fix this issue ?

 

[flexihopper]

zte mf180 din gamit ko..since smart pa lang ang may free net, diko muna gagalawin thanks dito ts..bm muna

 

[jhowel22]

bat yung 3G signal ko naging grps nalang lagi,,

patulong naman?

 

[kurorohizuku]

bat yung 3G signal ko naging grps nalang lagi,,

patulong naman?

uhm.. dapat po ibalik mo sa original firmware ng mf180 ung pang philippines kasi walang hspa signal ang DL_MF180_MTS_RU_EUV1.00.03 bale ginagamit lang xa para pangunlock , pagunlock na modem mo ibalik mo na sya sa original firmware nia.. kakaunlock ko lng ng mf180 nung isang araw eh.. nangyari din sakin yan,, un ung naging solusyon ko jan.

 

[wynner]

penge naman ng original mf180 philippines, file corrupt kasi yung nasa orig author eh. Tnx

 

[CARLSON2025]

asar ayaw talaga No return value,write operation fail 50%

(10. After Step#9 is done. There will be a prompt message just click yes, then close your dashboard, then unplug USB stick.).............wala naman promp message sakin eh......

upload nyo na screenies o kaya video hayzzzz

 

[papol22]

pa help nmn na delete ko kse ung ZTEMODEM.ISO eh ngayn d ma mdetect ung broadband.pnu ko mababalik ung ZTEMODEM.ISO?

 

[Sonugero]

pa help nmn na delete ko kse ung ZTEMODEM.ISO eh ngayn d ma mdetect ung broadband.pnu ko mababalik ung ZTEMODEM.ISO?

Follow the steps here http://www.symbianize.com/showthread.php?t=570717

 

[Sonugero]

I WILL UPLOAD A VIDEO TUTORIAL FOR THIS ONE PRA IWAS ERROR SA MGA NEWBIE AT IWAS NADIN SA MGA TANUNG. DI KC AKO MAXADO NAKAKA UPDATE D2 DUE TO MY BUSY WORK. I WILL POST THE LINK ANY minute FROM NOW SO STAY TUNE.



AGAIN: IM NOT THE ORIGINAL AUTHOR OF THIS THREAD. COPY PASTE KO LANG PO ETO SA ORIGINAL AUTHOR "macmiester" sa kanya po kayu magpasalamat wag sakin.


May nakita din akong ibang nag post nito at nalilito ako kung xa ba or si macmeister ang original author. nweiz, bhala na kung sino basta nkakatulong sa mga fellow symbianizers.


Share ko lang po etong na diskobre ko na pang unlock ng ZTE MF180..100% working po xa sakin...no spam..promise... 1st time ko po mag post dito...weeee

credits to macmeister

COPY PASTE LANG PO ETO SA ORIGINAL AUTHOR NETONG THREAD. WAG PO KAYU SAKIN MAGPASALAMAT!

Download these files 1st:

A (QPST SET-UP)>> http://www.mediafire.com/?prcay31b1lnn1u9

B (MDM-MTS MF180)>> http://www.mediafire.com/?d1aecbsanoqyxbp

C (DL_MF180_MTS_RU_EUV1.00.03)>> http://www.mediafire.com/?eulg4awetc1rnjl

D (Original Firmware MF180 Philippines)>> http://www.mediafire.com/?kuf26987vsp88ta

E (Original MF180 Dashboard)>> http://www.mediafire.com/?2xddxasd84r9g53


*Follow the Steps Carefully*

1. Install QPST

2. Open QPST SERVER (go to start, All Programs, QPST, click QPST Configuration or C://Program files/QPST/bin/QPST Server)

3. Plug your MF180 USB stick

4.Go to Ports

5. Click add new port then Choose the port number of your USB stick (Example : Com3 - USB/QC Diagnostic)
- then click OK

6. Then in Ports Choose the port number of your USB stick (Ex: Com3)

7. Go To Start Clients, click Efs Explorer, then Click OK

8. Then Delete this files . Be careful that you will not delete the folders.

config
reset_cntr.bin
pbm_phone_uid.dat
pbm_master_v_20.dat
ZTEMODEM.ISO
UimEfsAPDULog.Txt
NODOWNLOAD.FLG
SWITCH.TMP
AUTORUN.FLG


Note: If ever that there's no SWITCH.TMP , it's ok, as long you will not delete the folders.

9. Extract yung MDM-MTS.RAR, After extracting, drag and drop/copy the files contained on that folder to the location of Step#8.

10. After Step#9 is done. There will be a prompt message just click yes, then close your dashboard, then unplug USB stick.

11. Plug the USB stick again, then run DL_MF180_MTS_RU_EUV1.00.03.exe . Just click the Button there after the USB stick has been detected. Just wait until it finished. That will last to 15-20mins until it finished. You just wait and NEVER UNPLUG USB STICK. NO INTERNET CONNECTION NEEDED!

NOTE: It's normal that you will not have internet connection while using QPST.

*IMPORTANT FINISHING STEPS*

- I recommend that after the succesful update of DL_MF180_MTS_RU_EUV1.00.03, repeat the procedure from step#1 - step#8 then delete all the files there except folders. No need to repeat step#9 - step#11.

- Then put the files contained in Original Firmware MF180 Philippines except the ZTEMODEM.ISO.

- Extract the (Original MF180 Dashboard), then copy that to step#8 location.

- There will be a prompt message just click yes, then close your dashboard, then unplug USB stick.

- After unplugging, Uninstall SmartBro. Clean it with CCcleaner/other cleaner. Make it sure that SmartBro folder has been deleted to C://Program files.

- Plug the USB stick and wait autorun to install. After that install SMARTBRO.


CONFIGURING THE DASHBOARD

1. Go to your desktop at hanapin ang smartbro na logo.
2. Right click the icon and click Properties then click Find target.
3. A new window will appear, just find "NetConfig.ini" and double click it..
4. Eto po yung lalabas: (Edit niyo lang kung anung sim gagamitin niyo)

(For Globe)

[SmartBro]
Name=Globe
UserName=none
UserPass=none
DialNum=*99***1#
IsAutoGetAPN=0
APN=http.globe.com.ph
IsAutoGetDNS=1
MainDNSaddr=8.8.8.8 (pwede kahit anung dns gusto niyo ilagay dito)
AltDNSAddr=8.8.4.4 (pwede kahit anung dns gusto biyo ilagay dito)
IsAutoGetPDP=1
pdpAddr=0.0.0.0
pdpType=IP
AuthType=PAP
IsDfault=1
DeniEditDelete=1
askUserAndPass=0
SaveuserAndPass=0
IsFactoryDefault=1
IsMmsConfig=0


(For SMART)

[SmartBro]
Name=SMART
UserName=none
UserPass=none
DialNum=*99#
IsAutoGetAPN=0
APN=internet (pwede kahit anu gusto nio ilagay)
IsAutoGetDNS=1
MainDNSaddr=8.8.8.8
AltDNSAddr=8.8.4.4
IsAutoGetPDP=1
pdpAddr=0.0.0.0
pdpType=IP
AuthType=PAP
IsDfault=1
DeniEditDelete=1
askUserAndPass=0
SaveuserAndPass=0
IsFactoryDefault=1
IsMmsConfig=0

(For Sun)

[SmartBro]
Name=Globe
UserName=none
UserPass=none
DialNum=*99#
IsAutoGetAPN=0
APN=minternet
IsAutoGetDNS=1
MainDNSaddr=8.8.8.8
AltDNSAddr=8.8.4.4
IsAutoGetPDP=1
pdpAddr=0.0.0.0
pdpType=IP
AuthType=PAP
IsDfault=1
DeniEditDelete=1
askUserAndPass=0
SaveuserAndPass=0
IsFactoryDefault=1
IsMmsConfig=0


DONE!!!!!!!!!!

TS, nangopya ka lang ba dito http://www.symbianize.com/showthread.php?t=720700 Pareho lang ang mga files nyo na NOT WORKING!!! Sana CLOSE THREAD na to

 

[dempzter20]

dami ng comment ng :working: closed thread

 

[dhustinechael]

sir working b tlga toh? natatakot kasi aqng gawin bka msira ung broadband q? saka pag ginawa b toh kelangan may nakasalpak na globe sim for example o dapat wulang sim n nkainsert?

 

[dhustinechael]

otor tlga bng ibang language ung DL_MF180? ska my lalabas ba successful ung pgupdate o pgnkita qng 100/100 na icoclose q n lng ung window nun??

 

[pasimplengqt]

i know this is an old thread pero tnry ko kc gusto ko nga iunlock ang aking device... unfortunately walang nangyari...nagka error kc dun sa DL_MF180_MTS_RU_EUV1.00.03... anyway dahil sa iba gumana congrats basta sakin ayaw

 

[janemer07]

dapat may internet connection pag nag flash ng ganyan?